Arduino - RS-485 Expansion Board

[support]

You're welcome!

It's worth to notice that tutorial for that example is available here https://forum.phpoc.com/articles/tutorials/1248-ar...

[support]

If it work in your local network, It means nothing wrong with you application and configuration on PHPoC. Currently you are using a private IP, which...

[support]

Hello Konstantinos,

The system files (we called flash files) you used only work with old firmware. We have just released new firmware version...

[support]

No library is required to connect to Internet. I think problem in your network configuration.
Could you please show screenshot of the network configuration...

[support]

You're welcome!

[support]

Dear Äaren Lee,
Which product are you using? PHPoC Blue/Black or PHPoC [WiFi] Shield for Arduino?
Are you connecting via Ethernet or WiFi?...

[support]

Hello Konstantinos,
Please do the following step to connectPHPoC Shield to PHPoC debugger:
- Stack PHPoC Shield on Arduino.
- Connect...

This tutorial is for the upcoming PhpocExpansion library

PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14)...

This tutorial is for the upcoming PhpocExpansion library

PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14)...

This tutorial is for the upcoming PhpocExpansion library

PES-2606 is an easy-to-use RS-232 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS-232.
Especially, Arduino does NOT use UART pins to communicate with RS-232 expansion board. Therefore, users can use Arduino UART pins for other purposes.
Moreover, A single Arduino Uno/Mega can communicate with multiple RS-232 expansion boards (up to 14) without using Arduino...

This tutorial is for the upcoming PhpocExpansion library

PES-2605 is an easy-to-use stepper motor controller for Arduino Uno and Mega, which uses micro-stepping method to precisely control stepper motor.
Library and example for the stepper motor controller are part of of PhpocExpansion librabry for Arduino. The library reference is available here.

This tutorial shows how to use the step motor controller with an example of PhpocExpansion librabry for Arduino.
...

This tutorial is for the upcoming PhpocExpansion library

PES-2604 is an easy-to-use DC motor controller for Arduino Uno and Mega.
Library and example for the DC motor controller are part of of PhpocExpansion library for Arduino. The library reference is available here.

This tutorial shows how to use the DC motor controller with an example of PhpocExpansion library for Arduino.


Hardware Required

• Arduino Uno or Mega + USB cable
• PHPoC Shield

...

This tutorial is for the upcoming PhpocExpansion library

PES-2602 is an easy-to-use 4-port Input Expansion Board for Arduino Uno and Mega, which allows Arduino to monitor state of DC electric. In addition, it can monitor NPN, PNP and dry contact(relay).
Library and example for the 4-port input expansion board are part of of PhpocExpansion library for Arduino. The library reference is available here.

This tutorial shows how to use 4-port input expansion board with...

This tutorial is for the upcoming PhpocExpansion library

PES-2601 is an easy-to-use 4-port Relay Expansion Board for Arduino Uno and Mega, which allows Arduino to control DC electric on/off .
Library and example for the 4-port Relay Expansion Board are part of of PhpocExpansion library for Arduino. The library reference is available here.

This tutorial shows how to use 4-port Relay Expansion Board with an example of PhpocExpansion library for Arduino.

...

Web Serial Monitor is one of the built-in embedded web apps in PHPoC [WiFi] Shield.

Web Serial Monitor is similar to Serial Monitor on Arduino IDE, except for the following points:

• Web Serial Monitor is accessed on web browser through Internet (Serial Monitor is accessed on Arduino IDE through USB cable).
• Web Serial Monitor can be accessed from any OS (Android, iOS, Windows, macOS, Linux...) without any installation. Therefore, you can monitor Arduino from mobile devices.

...

This is an example of using Arduino Uno/Mega and PHPoC [WiFi] Shield to send an email.

Hardware Required

• Arduino Uno or Mega
• PHPoC Shield (P4S-347) or PHPoC WiFi Shield (P4S-348)

Circuit

• Stack PHPoC Shield or PHPoC WiFi Shield on Arduino Uno or Mega
  

Note that: Arduino communicates with PHPoC [WiFi] Shield via pins 10, 11, 12 and 13 on the Uno, and pins 10, 50, 51 and 52 on the Mega. Therefore,...

comming soon!

comming soon!

Web Remote Push is one of the built-in embedded web apps in PHPoC [WiFi] Shield.

When an user presses/releases a button on this web apps, the web app sends an uppercase/lowercase characters corresponding with the name of button to Arduino via WebSocket.

This tutorial shows how to use Web Remote Push to control Arduino.



Hardware Required

• Arduino Uno or Mega
• PHPoC Shield (P4S-347) or PHPoC WiFi Shield (P4S-348)

Circuit

• Stack

...

Web Remote Slide is one of the built-in embedded web apps in PHPoC [WiFi] Shield.

When an user moves a slider on this web app, the web app sends the slider name and slider value to Arduino via WebSocket.

This tutorial shows how to use Web Remote Slide to control Arduino.



Hardware Required

• Arduino Uno or Mega
• PHPoC Shield (P4S-347) or PHPoC WiFi Shield (P4S-348)

Circuit

• Stack PHPoC Shield or PHPoC WiFi Shield on Arduino

...