Control Pan-tilt Camera with PHPoC Black - PHPoC Forum

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

Todd started a blog post Control Pan-tilt Camera with PHPoC Black
03-27-2018, 03:03 PM

Share

Tweet
Control Pan-tilt Camera with PHPoC Black

[Project]

Pan-tilt Camera

[Items]

1. PHPoC Black
2. RS422/RS485 Board
3. Tablet (to connect to the PHPoC Black webpage)
4. Pan-tilt camera (connected to the PHPoC Black via RS485)

[Operation]
Connect the pan-tilt camera to the PHPoC Black via RS485, and configure transmission speed with the DIP switch on the bottom of the camera. These cameras provide various pan-tilt protocols. However, I used only Pelco-D protocol for this demonstration. I can control the camera by using web socket and the images of pan, tilt, and zoom buttons.

[Screenshot of the webpage]

[Video Clip]
Tags: None

Likes 2
Previous template Next

You must be logged in to post a comment.

Working...

X