Announcement

Collapse
No announcement yet.

Tutorials

Collapse
  •  
  • Filter
  • Time
  • Show
Clear All
new posts

  • Servo Motor - How to Control Servo Motor

    Servo Motor - How to Control Servo Motor

    Tutorial Video



    Hardware
    • PHPoC Blue or PHPoC Black
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Servo Motor
    • Jumper Cable


    About Servo Motor

    Stardard servo motor is used to control of angular (usually between 0 and 180 degrees). The servo motor used in this example includes three wires:
    • VCC wire.
    • GND wire.
    • Signal wire (receives the PWM control signal from controller).
    How the servo motor works: servo motor can be controlled...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:47 AM.

  • Servo Motor - Controlling Servo Motor from Webpage using Hypertext

    Servo Motor - Controlling Servo Motor from Webpage using Hypertext

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Servo Motor
    • Jumper Cable


    About Servo Motor

    Stardard servo motor is used to control of angular (usually between 0 and 180 degrees). The servo motor used in this example includes three wires:
    • VCC wire.
    • GND wire.
    • Signal wire (receives the PWM control signal from controller).
    How the servo motor...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:46 AM.

  • Servo Motor - Controlling Servo Motor from Webpage with Image

    Servo Motor - Controlling Servo Motor from Webpage with Image

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Servo Motor
    • Jumper Cable


    About Servo Motor

    Stardard servo motor is used to control of angular (usually between 0 and 180 degrees). The servo motor used in this example includes three wires:
    • VCC wire.
    • GND wire.
    • Signal wire (receives the PWM control signal from controller).
    How the servo motor...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:46 AM.

  • Servo Motor - Controlling Servo Motor via WebSocket with Graphic UI

    Servo Motor - Controlling Servo Motor via WebSocket with Graphic UI

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Servo Motor
    • Jumper Cable


    About Servo Motor

    Stardard servo motor is used to control of angular (usually between 0 and 180 degrees). The servo motor used in this example includes three wires:
    • VCC wire.
    • GND wire.
    • Signal wire (receives the PWM control signal from controller).
    How the servo motor...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:45 AM.

  • Ultrasonic Sensor - How to Use Ultrasonic Sensor

    Ultrasonic Sensor - How to Use Ultrasonic Sensor

    Tutorial Video



    Hardware
    • PHPoC Blue or PHPoC Black
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Ultrasonic Sensor
    • Jumper Cable


    About Ultrasonic Sensor

    Ultrasonic sensor HC-SR04 is used to measure distance to an object by using ultrasonic waves. The ultrasonic sensor HC-SR04 includes four pins:
    • VCC pin.
    • GND pin.
    • TRIG pin: this pin receives a 10-microsecond pulse from controller to emit ultrasonic wave.
    • ECHO pin:
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:44 AM.

  • Ultrasonic Sensor - Monitoring Distance from Webpage using Hypertext

    Ultrasonic Sensor - Monitoring Distance from Webpage using Hypertext

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Ultrasonic Sensor
    • Jumper Cable


    About Ultrasonic Sensor

    Ultrasonic sensor HC-SR04 is used to measure distance to an object by using ultrasonic waves. The ultrasonic sensor HC-SR04 includes four pins:
    • VCC pin.
    • GND pin.
    • TRIG pin: this pin receives a 10-microsecond pulse from controller to emit
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:43 AM.

  • Ultrasonic Sensor - Monitoring Distance from Webpage with Image

    Ultrasonic Sensor - Monitoring Distance from Webpage with Image

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Ultrasonic Sensor
    • Jumper Cable


    About Ultrasonic Sensor

    Ultrasonic sensor HC-SR04 is used to measure distance to an object by using ultrasonic waves. The ultrasonic sensor HC-SR04 includes four pins:
    • VCC pin.
    • GND pin.
    • TRIG pin: this pin receives a 10-microsecond pulse from controller to emit
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:43 AM.

  • Ultrasonic Sensor - Monitoring Distance via WebSocket

    Ultrasonic Sensor - Monitoring Distance via WebSocket

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Ultrasonic Sensor
    • Jumper Cable


    About Ultrasonic Sensor

    Ultrasonic sensor HC-SR04 is used to measure distance to an object by using ultrasonic waves. The ultrasonic sensor HC-SR04 includes four pins:
    • VCC pin.
    • GND pin.
    • TRIG pin: this pin receives a 10-microsecond pulse from controller to emit
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:42 AM.

  • Light Sensor - How to Use Light Sensor

    Light Sensor - How to Use Light Sensor

    Tutorial Video



    Hardware
    • PHPoC Blue or PHPoC Black
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Light Sensor
    • Jumper Cable


    About Light Sensor

    Light sensor is used to detect the current ambient light level - i.e. how bright/dark it is. The light sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs analog signal).
    How the light sensor works:
    • The sensor outputs analog signal to signal
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:55 AM.

  • Light Sensor - Monitoring Light Sensor from Webpage using Hypertext

    Light Sensor - Monitoring Light Sensor from Webpage using Hypertext

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Light Sensor
    • Jumper Cable


    About Light Sensor

    Light sensor is used to detect the current ambient light level - i.e. how bright/dark it is. The light sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs analog signal).
    How the light sensor works:
    • The sensor
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:54 AM.
There are no articles in this category.
 
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Latest Articles

Collapse

  • Arduino - RS-485 Expansion Board
    by support
    PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
    Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14) without using Arduino UART pins.

    Library and examples for...
    11-13-2018, 02:45 PM
  • Arduino - RS-422 Expansion Board
    by support
    PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
    Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14) without using Arduino UART pins.

    Library and examples for...
    11-13-2018, 02:44 PM
  • Arduino - RS-232 Expansion Board
    by support
    PES-2606 is an easy-to-use RS-232 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS-232.
    Especially, Arduino does NOT use UART pins to communicate with RS-232 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS-232 expansion boards (up to 14) without using Arduino UART pins.

    Library and example for the RS-232 expansion board...
    11-13-2018, 02:43 PM
  • Arduino - Stepper Motor Controller
    by support
    PES-2605 is an easy-to-use stepper motor controller for Arduino Uno and Mega, which uses micro-stepping method to precisely control stepper motor.
    Library and example for the stepper motor controller are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use the step motor controller with an example of PhpocExpansion library for Arduino.


    Hardware Required...
    11-13-2018, 02:41 PM
  • Arduino - DC Motor Controller
    by support
    PES-2604 is an easy-to-use DC motor controller for Arduino Uno and Mega.
    Library and example for the DC motor controller are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use the DC motor controller with an example of PhpocExpansion library for Arduino.


    Hardware Required...
    11-13-2018, 02:40 PM
  • Arduino - Digital Input Board
    by support
    PES-2602 is an easy-to-use 4-port Input Expansion Board for Arduino Uno and Mega, which allows Arduino to monitor state of DC electric device. In addition, it can monitor NPN, PNP and dry contact(relay).
    Library and example for the 4-port input expansion board are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use 4-port input expansion board with an example of PhpocExpansion library for Arduino.

    ...
    11-13-2018, 02:39 PM
Working...
X