Announcement

Collapse
No announcement yet.

Tutorials

Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Buzzer - Controlling Buzzer via WebSocket

    Buzzer - Controlling Buzzer via WebSocket

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Piezo Buzzer
    • Jumper Cable


    About Buzzer

    Buzzer is used to make sound, tone and alerts. The buzzer used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (receives the control signal from controller).
    How the buzzer works:
    • If generating a square wave of the specified frequency
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 09:01 AM.

  • Touch Sensor - How to Use Touch Sensor

    Touch Sensor - How to Use Touch Sensor

    Tutorial Video



    Hardware
    • PHPoC Blue or PHPoC Black
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Touch Sensor
    • Jumper Cable


    About Touch Sensor

    Touch sensor is used to detect the touch of finger. The touch sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs digital signal).
    How the touch sensor works:
    • If sensor is touched by finger, value of the sensor's signal pin is HIGH (VCC).
    • Otherwise,
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:57 AM.

  • Touch Sensor - Monitoring Touch Sensor from Webpage using Hypertext

    Touch Sensor - Monitoring Touch Sensor from Webpage using Hypertext

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Touch Sensor
    • Jumper Cable


    About Touch Sensor

    Touch sensor is used to detect the touch of finger. The touch sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs digital signal).
    How the touch sensor works:
    • If sensor is touched by finger, value of the sensor's
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:57 AM.

  • Touch Sensor - Monitoring Touch Sensor from Webpage with Image

    Touch Sensor - Monitoring Touch Sensor from Webpage with Image

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Touch Sensor
    • Jumper Cable


    About Touch Sensor

    Touch sensor is used to detect the touch of finger. The touch sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs digital signal).
    How the touch sensor works:
    • If sensor is touched by finger, value of the sensor's
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:56 AM.

  • Touch Sensor - Monitoring Touch Sensor via WebSocket

    Touch Sensor - Monitoring Touch Sensor via WebSocket

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Touch Sensor
    • Jumper Cable


    About Touch Sensor

    Touch sensor is used to detect the touch of finger. The touch sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin (outputs digital signal).
    How the touch sensor works:
    • If sensor is touched by finger, value of the sensor's
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:55 AM.

  • Rotary Angle Sensor - How to Use Rotary Angle Sensor

    Rotary Angle Sensor - How to Use Rotary Angle Sensor

    Tutorial Video



    Hardware
    • PHPoC Blue or PHPoC Black
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Rotary Angle Sensor
    • Jumper Cable


    About Rotaty Angle Sensor

    Rotaty angle sensor (also called potentiometer) is used to linearly adjust/change something in value. The rotaty angle sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin ( produces analog output between 0 and VCC).
    How the rotaty angle...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:52 AM.

  • Rotary Angle Sensor - Monitoring Rotary Angle Sensor from Webpage using Hypertext

    Rotary Angle Sensor - Monitoring Rotary Angle Sensor from Webpage using Hypertext

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Rotary Angle Sensor
    • Jumper Cable


    About Rotaty Angle Sensor

    Rotaty angle sensor (also called potentiometer) is used to linearly adjust/change something in value. The rotaty angle sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin ( produces analog output between
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:51 AM.

  • Rotary Angle Sensor - Monitoring Rotary Angle Sensor from Webpage with Image

    Rotary Angle Sensor - Monitoring Rotary Angle Sensor from Webpage with Image

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Rotary Angle Sensor
    • Jumper Cable


    About Rotaty Angle Sensor

    Rotaty angle sensor (also called potentiometer) is used to linearly adjust/change something in value. The rotaty angle sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin ( produces analog output between
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:51 AM.

  • Rotary Angle Sensor - Monitoring Rotary Angle Sensor via WebSocket

    Rotary Angle Sensor - Monitoring Rotary Angle Sensor via WebSocket

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Rotary Angle Sensor
    • Jumper Cable


    About Rotaty Angle Sensor

    Rotaty angle sensor (also called potentiometer) is used to linearly adjust/change something in value. The rotaty angle sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin ( produces analog output between
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:51 AM.

  • Rotary Angle Sensor - Monitoring Rotary Angle Sensor via WebSocket with Gauge

    Rotary Angle Sensor - Monitoring Rotary Angle Sensor via WebSocket with Gauge

    Tutorial Video



    Hardware
    • PHPoC Blue (+ USB WLAN) or PHPoC Black (+ Ethernet cable)
    • Micro USB to USB Cable (to upload source code to PHPoC Device)
    • Rotary Angle Sensor
    • Jumper Cable


    About Rotaty Angle Sensor

    Rotaty angle sensor (also called potentiometer) is used to linearly adjust/change something in value. The rotaty angle sensor used in this example includes three pins:
    • VCC pin.
    • GND pin.
    • Signal pin ( produces analog output between
    ...
    See more | Go to post
    Last edited by support; 02-09-2018, 08:47 AM.
There are no articles in this category.
  • Filter
  • Time
  • Show
Clear All
new posts
Please log in to your account to view your subscribed posts.

Latest Articles

Collapse

  • Arduino - RS-485 Expansion Board
    by support
    PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
    Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14) without using Arduino UART pins.

    Library and examples for...
    11-13-2018, 02:45 PM
  • Arduino - RS-422 Expansion Board
    by support
    PES-2607 is an easy-to-use RS422/RS485 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS422 or RS485.
    Especially, Arduino does NOT use UART pins to communicate with RS422/RS485 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS422/RS485 expansion boards (up to 14) without using Arduino UART pins.

    Library and examples for...
    11-13-2018, 02:44 PM
  • Arduino - RS-232 Expansion Board
    by support
    PES-2606 is an easy-to-use RS-232 Expansion Board for Arduino Uno and Mega, which allows Arduino to exchange data with serial device via RS-232.
    Especially, Arduino does NOT use UART pins to communicate with RS-232 expansion board. Therefore, users can use Arduino UART pins for other purposes.
    Moreover, A single Arduino Uno/Mega can communicate with multiple RS-232 expansion boards (up to 14) without using Arduino UART pins.

    Library and example for the RS-232 expansion board...
    11-13-2018, 02:43 PM
  • Arduino - Stepper Motor Controller
    by support
    PES-2605 is an easy-to-use stepper motor controller for Arduino Uno and Mega, which uses micro-stepping method to precisely control stepper motor.
    Library and example for the stepper motor controller are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use the step motor controller with an example of PhpocExpansion library for Arduino.


    Hardware Required...
    11-13-2018, 02:41 PM
  • Arduino - DC Motor Controller
    by support
    PES-2604 is an easy-to-use DC motor controller for Arduino Uno and Mega.
    Library and example for the DC motor controller are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use the DC motor controller with an example of PhpocExpansion library for Arduino.


    Hardware Required...
    11-13-2018, 02:40 PM
  • Arduino - Digital Input Board
    by support
    PES-2602 is an easy-to-use 4-port Input Expansion Board for Arduino Uno and Mega, which allows Arduino to monitor state of DC electric device. In addition, it can monitor NPN, PNP and dry contact(relay).
    Library and example for the 4-port input expansion board are part of of PhpocExpansion library for Arduino. The library reference is available here.

    This tutorial shows how to use 4-port input expansion board with an example of PhpocExpansion library for Arduino.

    ...
    11-13-2018, 02:39 PM
Working...
X